Find the right parts for your EZ Loader TA96BS trailer—without guesswork.
The TA96BS is one of the most common EZ Loader bunk-style trailers, used across a wide range of boat types. But when it comes to replacement parts, details matter—axle type, hub size, bunk configuration, and brake setup all affect what fits.
This guide helps you identify the most common replacement parts and where to start.
Not sure which parts fit your TA96BS? Call us—we’ll match it correctly based on your trailer setup.
What Trailer This Is
The EZ Loader TA96BS is a tandem axle bunk-style trailer typically used for fiberglass boats, center consoles, and bay boats.
- “TA” = Tandem Axle
- ““96” = Approximate overall trailer width (measured across the fenders or outside of tires)
- “B” = Bunk system
- "S" = Leaf spring suspension
These trailers are commonly found in capacity ranges from approximately 4000 lb up to 7,900 lb, depending on configuration and year.
Important: Not all TA96BS trailers are identical. Axles, hubs, brakes, and bunk setups can vary.
Common Replacement Parts
Most TA96BS owners will need replacement parts in the following categories over time:
- Hub assemblies (oil bath or grease)
- Bearings and seals
- Brake components (disc or drum)
- Bunks and bunk mounting brackets
- Trailer hardware and mounting components
Below are the most common starting points.
Hubs & Bearings
EZ Loader TA96BS trailers are typically equipped with either oil bath hubs or grease-packed hubs, depending on the year, axle configuration and any updates or replacements over time. Always confirm before ordering.
Correct fitment depends on:
- Spindle size
- Bolt pattern (5-lug, 6-lug, etc.)
- Axle rating
Start here:
Tip: If you're not sure, give us your axle or hub measurements—we’ll match it correctly.
Brakes
TA96BS trailers may be equipped with disc brakes or drum brakes, depending on model and upgrades.
Common replacement items include:
- Brake pads
- Rotors
- Calipers
- Brake lines
Start here:
Important: Brake type and size must match your axle and hub setup.
Bunks & Brackets
The bunk system is critical for proper hull support and safe transport.
Common replacement parts include:
- Bunk boards (wood or composite)
- Carpet or Poly bunk covering
- Upright or Horizontal brackets (depending on trailer configuration)
- Top hats, L-style brackets, strap-style brackets and mounting hardware
Fitment matters: bracket style, height, and spacing all affect how your boat sits and loads on the trailer.
Start here:
Fitment matters: Bunk height, spacing, and angle all affect how your boat loads and sits on the trailer.
Hardware & Mounting Components
Many trailer issues come down to worn or incorrect hardware.
This includes:
- U-bolts
- Mounting plates
- Bolts and locknuts
- Bracket hardware
Start here:
Not Sure? Call Us First
Trailer parts are not one-size-fits-all.
The fastest way to get the right parts is to confirm your setup before ordering.
📞 Call 843-784-5797
We’ll help you match the correct parts based on your trailer.
No texting — just real answers from real people.
What to Have Ready When You Call
- Trailer model (TA96BS or similar)
- VIN (if available)
- Axle or hub measurements
- Photos of your current setup (very helpful)
Photos are often the fastest way for us to confirm the correct parts.