38" Bunk / Roller Channel Mounting Tray 250-022046-10

Galvanized Bunk / Roller Support Tray

The 38" Bunk / Roller Channel Mounting Tray 250-022046-10 is a galvanized channel mounting tray used on compatible EZ Loader bunk and roller boat trailers. This EZ Loader bunk or roller mounting tray is used in the trailer support area where bunk boards, roller assemblies, or related support hardware mount to the trailer structure.

This channel mount is used on compatible bunk and/or roller trailers. The mounting surface measures 3.25" wide x 35.75" long and includes a teardrop opening with a hole for tiedown use.

This tray helps support and position boat-support hardware on compatible EZ Loader trailers. Depending on the trailer configuration, it may be used with bunk support hardware, roller assemblies, brackets, U-bolts, crossmember hardware, or related trailer support components.

This is not the wood bunk board, bunk carpet, roller, or complete support assembly by itself. It is the galvanized channel tray / mounting plate used with compatible EZ Loader bunk or roller hardware. Correct fitment depends on the trailer model, VIN, crossmember location, bunk or roller layout, tray length, mounting surface, hole pattern, bracket style, and original EZ Loader trailer configuration.

Key Features

• Genuine EZ Loader 38" bunk or roller channel mounting tray
• Part number 250-022046-10
• 3.25" wide x 35.75" long mounting surface
• 38" listed overall tray length
• Includes teardrop opening with hole for tiedown use
• Galvanized steel construction for marine trailer use
• Used with compatible bunk or roller support setups
• Helps support and position boat-support hardware on compatible EZ Loader trailers

Bunk and Roller Trailer Applications

This channel mount is used on compatible bunk and/or roller trailers. Depending on the trailer configuration, it may be used around wood bunks, carpeted bunks, cypress bunks, roller assemblies, bunk brackets, roller brackets, or related support hardware.

Because bunk and roller layouts vary by trailer, always confirm the trailer model, VIN, crossmember location, mounting surface, hole pattern, and support layout before ordering.

Typical EZ Loader Trailer Applications

This mounting tray is commonly used on compatible EZ Loader boat trailers equipped with bunk or roller support systems. It is part of the support structure that helps position the bunk or roller assemblies where the boat hull contacts the trailer.

Always compare the part number, mounting surface, listed dimensions, crossmember location, hole pattern, mounting style, bunk or roller layout, support location, and trailer VIN before ordering.

Why This Support Tray Matters

Boat trailer bunks and rollers help carry and guide the hull during loading, unloading, towing, and storage. If the tray or support hardware is bent, rusted, missing, or mounted incorrectly, the boat may not sit evenly on the trailer. Correct support hardware helps keep the bunk or roller system aligned with the hull.

Installation Considerations

• Confirm whether the trailer uses a bunk setup, roller setup, or combination support layout.
• Confirm the correct crossmember location before ordering.
• Compare the existing tray length, mounting surface, width, hole pattern, and mounting style.
• Inspect nearby brackets, U-bolts, bolts, crossmembers, and bunk or roller hardware during service.
• Replace damaged or severely corroded mounting hardware as needed.
• Make sure the boat is supported safely before removing bunk or roller support hardware.
• After installation, confirm the boat rests evenly on the trailer support system.

Fitment Guidance

This is not a universal bunk or roller tray. Correct fitment depends on the trailer model, VIN, bunk or roller support layout, crossmember location, tray length, mounting surface, hole pattern, bracket style, and original EZ Loader trailer setup.

• Confirm part number 250-022046-10 when possible.
• Confirm the trailer uses a compatible 38" channel tray-style support component.
• Confirm whether the support area is for bunks, rollers, or both.
• Compare the existing tray to the new part before ordering.
• Check the mounting surface, hole pattern, and mounting hardware.
• Send photos if you are unsure about fitment.

Associated / Compatible Parts

These components are commonly inspected or serviced when replacing a bunk or roller channel mounting tray and will be linked as available.

Real-World Insight

Bunk and roller hardware has a direct effect on how the boat sits on the trailer. A bent tray, wrong bracket height, mismatched hole pattern, or missing hardware can change hull support and loading angle. When replacing this tray, inspect the full bunk or roller support area rather than only the visible damaged part.

Questions or Need Help Matching Parts?

We’re based in Hardeeville, South Carolina, and help customers across the country match EZ Loader trailer parts correctly.

Call us before ordering if you are unsure. Photos, measurements, trailer information, and VIN details can help us verify fitment faster.

Need help identifying your trailer style or where a part is located? Our legacy trailer reference site at 411Marine may help you find similar EZ Loader trailer examples.

For an overview of our company profile, business background, and code of ethics, visit 411-Trailers.

What to Have Ready When You Call

• Trailer year, make, and model
• VIN, if available
• Part number from the existing tray, if available
• Mounting surface measurement and listed tray length
• Hole pattern and crossmember location
• Whether the trailer uses bunks, rollers, or a combination support setup
• Photos of the tray, brackets, crossmember, U-bolts, bunk boards, rollers, tiedown area, and boat support area