Spring Hanger Welded Galvanized Bracket for 2" Frame 250-024766-10

EZ Loader Trailer Spring Hanger Bracket for 2" Frame Applications

The Spring Hanger Welded Galvanized Bracket for 2" Frame 250-024766-10 is a replacement suspension mounting bracket used on compatible EZ Loader boat trailers with 2" wide frame applications. This bracket is part of the leaf spring suspension mounting system and helps support the connection point between the trailer frame and spring hardware.

The manufacturer description identifies this part as Hanger Spring Welded (.19") 2" Frame Galvanized. This means the bracket is a galvanized welded spring hanger designed for compatible 2" frame trailer applications when the bracket shape, mounting location, spring setup, and trailer model match.

Fitment note: This spring hanger bracket should be matched by part number, frame width, bracket shape, bolt-hole location, spring layout, and trailer application. Do not assume it fits every 2" frame trailer or every EZ Loader spring suspension setup.

Spring hanger brackets are important because they help hold the leaf spring in the correct position under load. If a hanger bracket is bent, cracked, heavily rusted, worn at the bolt hole, or damaged from impact, the trailer suspension may not track or carry weight correctly.

This bracket is built from galvanized steel for marine trailer use. The galvanized finish helps resist corrosion in wet, humid, freshwater, and saltwater trailer environments.

Spring Hanger Bracket Features

• Replacement spring hanger bracket for compatible EZ Loader trailers
• Designed for select 2" wide frame applications
• Welded spring hanger bracket style
• Galvanized finish for marine trailer use
• Approximate .19" material thickness per manufacturer description
• Used in leaf spring suspension mounting applications
• Helps support the spring mounting point on the trailer frame
• Useful for replacing damaged, bent, rusted, cracked, or worn suspension brackets

Typical EZ Loader Trailer Applications

This spring hanger bracket may be used on compatible EZ Loader boat trailers with leaf spring suspension and a matching 2" wide frame application. Common service situations include suspension repair, spring replacement, damaged bracket replacement, frame hardware service, or rebuilding worn spring mounting points.

Because EZ Loader trailers use different suspension brackets by model, frame style, frame width, axle rating, and production year, always compare the existing bracket, part number, hole location, and mounting area before ordering.

Why the Spring Hanger Bracket Matters

The spring hanger bracket helps locate and support the leaf spring assembly. When the trailer is loaded, the spring, hanger, shackle hardware, axle, and frame all work together to carry weight and control suspension movement.

A worn or damaged hanger bracket can affect axle alignment, spring movement, and suspension tracking. Replacing a questionable bracket during service can help restore a stronger mounting point and reduce future suspension problems.

2" Frame Fitment

This bracket is intended for compatible 2" wide frame applications. Frame width is important, but it does not confirm fitment by itself.

The bracket shape, bolt-hole location, spring setup, frame location, and trailer application must also match. If your trailer uses a different frame width or a different spring hanger layout, this bracket may not be correct.

Galvanized Steel for Boat Trailer Use

EZ Loader uses galvanized steel on many trailer frame and suspension components because it provides practical corrosion resistance for marine trailer environments. Galvanizing helps protect the steel underneath from road spray, freshwater, saltwater, humidity, and ramp exposure.

Even galvanized parts should be inspected during trailer service. Heavy rust, cracking, impact damage, wallowed bolt holes, or bent mounting points are signs that suspension hardware may need replacement.

Associated / Compatible Parts

These related collections may be useful when servicing compatible EZ Loader spring suspension hardware. Confirm your specific trailer setup before ordering.

Installation Considerations

• Confirm the existing bracket matches part number 250-024766-10.
• Confirm the trailer uses compatible leaf spring suspension.
• Confirm the frame width is 2" where this bracket mounts.
• Inspect the trailer frame, spring, shackle hardware, bolts, bushings, and related suspension parts before reassembly.
• Replace badly rusted, bent, cracked, or wallowed-out brackets before towing.
• Do not assume spring hanger brackets are interchangeable by appearance alone.
• Confirm bolt-hole location and bracket orientation before installation.
• Tighten suspension hardware to the proper specification for the trailer application.
• Recheck suspension hardware after service and after initial towing.

Spring Hanger Bracket Fitment Guidance

This is not a universal trailer bracket.

• Confirm the trailer uses compatible EZ Loader leaf spring suspension.
• Confirm the part number is 250-024766-10.
• Confirm the mounting frame width is 2".
• Confirm bracket shape, height, width, depth, and hole placement.
• Compare the old bracket and mounting location before ordering.
• Use photos, measurements, trailer VIN, and existing part details when checking fitment.

Real-World Insight

Spring hanger brackets carry suspension load and help keep the spring assembly located correctly. A bracket that is cracked, bent, badly corroded, or worn at the bolt hole can create movement in the suspension system. When servicing springs, shackles, axles, or frame-mounted suspension hardware, inspect the hanger brackets carefully before reusing old parts.

Questions or Need Help Matching Parts?

We’re based in Hardeeville, South Carolina, serving customers nationwide.

📞 Call us — we answer the phone and help you get it right.
📧 Send photos if needed — often the fastest way to confirm spring hanger bracket fitment.

We focus on matching parts correctly the first time.

What to Have Ready When You Call

• Trailer year, make, and model
• VIN, if available
• Existing spring hanger bracket part number, if visible
• Frame width at the bracket mounting location
• Photos of the bracket, spring, shackle area, and frame mounting point
• Measurements of the old bracket
• Photos of any damage, rust, cracks, or worn bolt holes