8", 10" or 12" Disc Brake Pads 300-036928 | 1 Axle Set

Disc Brake Pad Set

The 8", 10" or 12" Disc Brake Pads 300-036928 | 1 Axle Set are replacement brake pads used for compatible EZ Loader trailer disc brake systems. This EZ Loader disc brake pad set helps restore braking performance when the original pads are worn, thin, contaminated, cracked, noisy, or unevenly wearing.

Built with a coated steel backing plate and organic friction pad material, this brake pad set is designed for compatible marine trailer disc brake applications. The organic pad compound helps support smooth, quieter braking while the coated steel backing helps the pad hold up in normal trailer service conditions.

This part is commonly used on EZ Loader trailer disc brake systems with 8", 10" or 12" brake rotors. Proper fitment matters because brake pads must match the rotor size, caliper style, axle setup, and original EZ Loader brake configuration.

Key Features

• Genuine EZ Loader replacement disc brake pad set
• Part number 300-036928
• Includes 2 pair of brake pads for 1 axle
• Fits compatible EZ Loader trailer disc brake systems with 8", 10" or 12" brake rotors
• Organic friction compound for smooth, quieter braking
• Coated steel backing plate with black and gray finish
• Designed for marine saltwater trailer use, including wet/dry cycles, ramp launches, and corrosion exposure
• Direct-fit replacement for compatible factory EZ Loader calipers

Typical EZ Loader Trailer Applications

This brake pad set is commonly used on compatible EZ Loader boat trailers equipped with disc brakes. It may apply to many EZ Loader trailer models from the mid-2000s through current production, depending on the trailer’s brake system, caliper style, and rotor size.

Always compare the part number, brake pad shape, brake pad dimensions, rotor size, caliper style, axle setup, trailer VIN, and existing brake system before ordering.

Installation Considerations

• Brake pads only are included.
• Calipers and mounting hardware are sold separately.
• Inspect both sides of the axle before replacing brake pads.
• Check calipers, rotors, slide pins, brake lines, and actuator function during service.
• Replace pads in axle sets so braking remains balanced from side to side.
• Do not reuse brake pads that are contaminated with grease, oil, or brake fluid.
• After installation, test the trailer brakes in a safe area before normal road use.

Symptoms of Worn EZ Loader Disc Brake Pads

• Squealing, grinding, or scraping noise
• Soft or inconsistent braking
• More pressure needed at towing speeds
• Scored or discolored rotors
• Trailer pulling right or left while braking
• Excess brake dust or uneven pad wear

Fitment Guidance

This is not a one-size-fits-all trailer brake part. Correct fitment depends on the trailer model, year, VIN, axle rating, rotor size, caliper style, brake system, and existing hardware.

• Confirm the part number when possible.
• Compare the brake pad shape and dimensions before ordering.
• Check the caliper style and rotor size.
• Confirm whether your trailer has disc brakes, not drum brakes.
• Send photos if you are unsure about fitment.

Associated / Compatible Parts

These components are commonly serviced or inspected when replacing trailer disc brake pads and will be linked as available.

Real-World Insight

Trailer brake pads wear differently depending on boat weight, ramp use, brake actuator condition, caliper movement, rotor condition, and saltwater exposure. If the pads are worn unevenly, the problem may not be the pads alone. A sticking caliper, damaged rotor, weak actuator, worn slide components, or contaminated brake system can shorten pad life and reduce braking performance.

Questions or Need Help Matching Parts?

We’re based in Hardeeville, South Carolina, and help customers across the country match EZ Loader trailer parts correctly.

Call us before ordering if you are unsure. We answer the phone and help confirm the right part whenever possible.

Photos, measurements, trailer information, and VIN details can help us verify fitment faster.

What to Have Ready When You Call

• Trailer year, make, and model
• VIN, if available
• Part number from the original component
• Rotor size: 8", 10" or 12"
• Brake pad dimensions: 6" L x 1-3/4" W x 5/8" D
• Photos of the caliper, rotor, brake pads, and axle brake assembly