24" Hydraulic Brake Line Male Fittings 250-041438
24" Hydraulic Brake Line Male Fittings 250-041438 is backordered and will ship as soon as it is back in stock.
Pickup available at EZLoaderParts411 Parts Counter
Usually ready in 24 hours
Care information
Care information
Display general product information or specific product information using metafields.
Delivery and Shipping
Delivery and Shipping
Add some general information about your delivery and shipping policies.
24" Hydraulic Brake Line Male Fittings 250-041438
Description
Description
Trailer Hydraulic Brake Line
The 24" Hydraulic Brake Line Male Fittings 250-041438 is a replacement hydraulic brake line used on compatible EZ Loader boat trailer brake systems. This EZ Loader hydraulic brake line helps carry brake fluid pressure between compatible trailer brake components so the hydraulic brake system can operate correctly.
This 24" brake line uses male fitting ends and is commonly used in hydraulic trailer brake routing where a short flexible brake line connection is needed. It may be used with compatible disc brake or drum brake surge systems depending on the trailer layout, connection points, and original EZ Loader brake configuration.
Built for compatible marine trailer applications, this brake line is used where road travel, ramp launches, wet/dry cycles, corrosion exposure, and repeated brake operation are part of normal service.
This is not a brake caliper, rotor, pad, actuator, or complete brake kit. It is a hydraulic brake line. Correct fitment depends on the brake line length, fitting style, routing path, brake system layout, connection points, and original EZ Loader trailer brake setup.
| Product Details | |
|---|---|
| Part Number: | 250-041438 |
| Fits: | Compatible EZ Loader trailer hydraulic brake systems using a 24" brake line with male fittings. Confirm line length, fitting style, routing path, and brake system layout before ordering. |
| Part Type: | Hydraulic Brake Line |
| Manufacturer: | EZ Loader |
| Line Length: | 24" |
| Fitting Style: | Male fitting ends |
| Brake System Type: | Compatible hydraulic surge brake systems, including select disc and drum brake applications |
| Application Type: | Trailer hydraulic brake line replacement |
| Brake System Area: | Hydraulic brake line routing between compatible trailer brake components |
| Package Size: | 9" x 7" x 2" padded envelope |
| Product Weight: | 13 oz |
| Included: | One 24" hydraulic brake line with male fittings |
| Function: | Transfers hydraulic brake fluid pressure between compatible trailer brake components |
| Commonly Used With: | Brake calipers, wheel cylinders, brake line tees, hydraulic fittings, surge brake actuators, axle brake assemblies, and trailer brake hardware |
| Why Buyers Like This Part: | Correct 24" replacement brake line, male fitting configuration, and useful for repairing damaged, leaking, kinked, or worn hydraulic brake lines on compatible EZ Loader trailers |
| Important Fitment Note: | Confirm part number 250-041438, 24" brake line length, male fitting style, routing path, brake system type, connection points, and trailer VIN before ordering. |
Key Features
- Genuine EZ Loader hydraulic brake line
- Part number 250-041438
- 24" brake line length
- Male fitting ends
- Used with compatible hydraulic surge brake systems
- May apply to compatible disc or drum brake trailer setups depending on routing and fittings
- Helps replace damaged, leaking, kinked, or worn brake lines
Typical EZ Loader Trailer Applications
This 24" hydraulic brake line is commonly used on compatible EZ Loader boat trailers equipped with hydraulic surge brake systems. It may apply where the trailer layout requires a 24" male-fitting brake line connection between brake components.
Always compare the part number, line length, fitting ends, routing path, brake line connection points, brake system type, and trailer VIN before ordering.
Why This Brake Line Matters
Hydraulic brake lines carry brake fluid pressure through the trailer brake system. A damaged, cracked, leaking, kinked, or corroded brake line can reduce braking performance or cause brake failure. Replacing the correct line helps restore proper brake fluid pressure and brake system reliability.
Installation Considerations
- Confirm the trailer uses a compatible 24" hydraulic brake line with male fittings before ordering.
- Compare the old line length and fitting ends to the new brake line.
- Inspect nearby brake fittings, tees, calipers, wheel cylinders, and actuator connections during service.
- Make sure the brake line is routed so it does not rub, kink, stretch, or contact moving parts.
- Replace damaged or contaminated brake fluid as needed.
- Bleed the brake system after opening the hydraulic brake line.
- After service, test the trailer brakes in a safe area before normal towing.
Fitment Guidance
This is not a universal brake line. Correct fitment depends on the trailer model, VIN, brake system layout, brake line length, fitting style, connection points, and routing path.
- Confirm part number 250-041438 when possible.
- Confirm the brake line length is 24".
- Confirm the line uses male fitting ends.
- Compare the old brake line to the new part before ordering.
- Check the line routing path and connection points.
- Send photos if you are unsure about fitment.
Associated / Compatible Parts
These components are commonly inspected or serviced when replacing a hydraulic brake line and will be linked as available.
| Part Description | Part Number |
|---|---|
| Disc Brake Caliper / Drum Brake Wheel Cylinder | Confirm by trailer application |
| Brake Line Tee / Fitting | Confirm by brake line routing |
| Hydraulic Brake Actuator | Confirm by trailer application |
| Brake Fluid / Bleeding Supplies | Service item / confirm by brake system |
Real-World Insight
Short hydraulic brake lines are often used near axle, caliper, wheel-cylinder, actuator, or junction areas where movement and routing matter. If the line is too short, too long, kinked, twisted, or routed against sharp edges, it can fail early. Match the length, fitting ends, and routing path before ordering.
Questions or Need Help Matching Parts?
We’re based in Hardeeville, South Carolina, and help customers across the country match EZ Loader trailer parts correctly.
Call us before ordering if you are unsure. Photos, measurements, trailer information, and VIN details can help us verify fitment faster.
Need help identifying your trailer style or where a part is located? Our legacy trailer reference site at 411Marine may help you find similar EZ Loader trailer examples. For newer 2026 and later EZ Loader model references, visit EZLoaderTrailers411.
What to Have Ready When You Call
- Trailer year, make, and model
- VIN, if available
- Part number from the original brake line, if available
- Brake line length and fitting style
- Brake system type: disc or drum, if known
- Photos of the brake line, fittings, caliper, wheel cylinder, actuator, and routing path
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
