Brake Caliper Banjo Block 250-032782

Hydraulic Brake Caliper Fitting

The Brake Caliper Banjo Block 250-032782 is a small hydraulic brake fitting used on compatible EZ Loader trailer disc brake caliper setups. This EZ Loader brake caliper banjo block helps connect the brake line or banjo-style fitting area at the caliper so hydraulic brake pressure can reach the disc brake assembly properly.

Although this is a small part, it plays an important role in the trailer brake system. A missing, damaged, corroded, or incorrect banjo block can cause brake fluid leaks, poor brake pressure, or trouble connecting the brake line correctly at the caliper.

Built from brass, this banjo block is used in compatible marine trailer brake applications where hydraulic brake lines, calipers, brake fluid, ramp use, road use, and wet/dry cycles are part of normal service.

This is not a brake pad, rotor, caliper, or actuator. It is a brake caliper hydraulic connection part. Proper fitment matters because the banjo block must match the caliper style, brake line connection, fitting size, and original EZ Loader trailer brake configuration.

Key Features

• Genuine EZ Loader brake caliper banjo block
• Part number 250-032782
• Used at the hydraulic brake line / caliper connection area
• Brass construction with brass / gold appearance
• Helps support proper hydraulic brake fluid connection at compatible calipers
• Used with compatible EZ Loader trailer disc brake systems
• Small replacement part that can help correct leaking, damaged, or missing caliper connection hardware

Typical EZ Loader Trailer Applications

This banjo block is commonly used on compatible EZ Loader boat trailers equipped with hydraulic disc brake calipers. It may apply where the brake line connection at the caliper uses a banjo-style block or fitting.

Always compare the part number, block dimensions, caliper style, brake line fitting, banjo bolt setup, and trailer VIN before ordering.

Why This Small Brake Part Matters

The banjo block helps create the correct connection point between the brake line and the caliper. If the block is damaged, missing, corroded, or mismatched, the trailer may lose brake fluid or fail to build proper hydraulic brake pressure at that caliper.

Installation Considerations

• Confirm the caliper uses a compatible banjo block setup before ordering.
• Inspect the brake line, banjo bolt, sealing washers, and caliper port during service.
• Replace damaged or contaminated brake fluid as needed.
• Make sure all hydraulic brake fittings seal correctly before towing.
• Bleed the brake system after opening the hydraulic brake line.
• After service, test the trailer brakes in a safe area before normal road use.

Fitment Guidance

This is not a universal hydraulic brake fitting. Correct fitment depends on the trailer model, VIN, caliper style, brake line fitting, banjo bolt setup, sealing washers, and existing brake hardware.

• Confirm part number 250-032782 when possible.
• Compare the old banjo block to the new part before ordering.
• Measure the block if the original part number is not visible.
• Confirm the brake line and caliper port style.
• Send photos if you are unsure about fitment.

Associated / Compatible Parts

These components are commonly inspected or serviced when replacing a caliper banjo block and will be linked as available.

Real-World Insight

A small hydraulic fitting can create a large brake problem if it does not seal correctly. When servicing trailer disc brakes, always inspect the caliper connection area for leaks, crushed fittings, damaged washers, stripped threads, or corrosion. If the hydraulic system has been opened, the brakes should be bled before the trailer is returned to service.

Questions or Need Help Matching Parts?

We’re based in Hardeeville, South Carolina, and help customers across the country match EZ Loader trailer parts correctly.

Call us before ordering if you are unsure. Photos, measurements, trailer information, and VIN details can help us verify fitment faster.

Need help identifying your trailer style or where a part is located? Our legacy trailer reference site at 411Marine.com may help you find similar EZ Loader trailer examples. For newer 2026 and later EZ Loader model references, visit EZLoaderTrailers411.com.

What to Have Ready When You Call

• Trailer year, make, and model
• VIN, if available
• Part number from the original fitting, if available
• Photos of the caliper, brake line, banjo block, and fitting area
• Measurements of the old block or hydraulic fitting