Brake Caliper Pads & Bracket 10" Rotor 5 Lug 250-034105

Complete Caliper Pad Assembly

EZ Loader Brake Caliper Pads & Bracket 10" Rotor 5 Lug 250-034105 is a replacement brake caliper assembly used on compatible EZ Loader boat trailer disc brake systems. This EZ Loader brake caliper with pads and bracket helps restore proper trailer braking performance when the original caliper is sticking, leaking, corroded, damaged, or no longer applying brake pressure correctly.

This caliper assembly is designed for compatible EZ Loader trailer brake systems using a 10" rotor and 5-lug hub setup. Because this assembly includes the caliper, brake pads, and mounting bracket, it can simplify brake service compared with replacing separate brake components one piece at a time.

Built from steel with a zinc-plated finish, this brake caliper assembly is designed for marine trailer use where road use, ramp launches, freshwater exposure, saltwater exposure, wet/dry cycles, and repeated braking are part of normal service.

This part is commonly used on EZ Loader trailer disc brake systems at the rotor, hub, and axle brake assembly. Proper fitment matters because brake calipers must match the rotor size, bracket style, hub setup, brake pads, hydraulic brake system, axle layout, and original EZ Loader brake configuration.

Key Features

• Genuine EZ Loader replacement brake caliper assembly
• Part number 250-034105
• Designed for compatible 10" rotor and 5-lug hub disc brake setups
• Includes brake caliper, brake pads, and bracket
• Steel construction with zinc-plated finish
• Used on compatible marine trailer disc brake systems
• Helps restore braking performance when the original caliper is worn, sticking, leaking, or damaged

Typical EZ Loader Trailer Applications

This caliper assembly is commonly used on compatible EZ Loader boat trailers equipped with 10" disc brake rotors and 5-lug hub brake setups. It may apply to trailers using hydraulic disc brakes, depending on the axle, rotor, hub, bracket, brake line, and actuator configuration.

Always compare the part number, rotor size, hub style, brake pad shape, bracket style, brake line connection, axle setup, and trailer VIN before ordering.

Installation Considerations

Before replacing a brake caliper, inspect the full brake assembly. A sticking or leaking caliper may be caused by corrosion, contaminated brake fluid, damaged brake lines, worn pads, rotor damage, or actuator problems.

• Confirm the trailer uses a compatible 10" rotor and 5-lug hub setup.
• Inspect the brake rotor surface before installing the new caliper assembly.
• Check brake lines, fittings, and the actuator before bleeding the system.
• Replace damaged or contaminated brake fluid as needed during service.
• Bleed the brake system after caliper replacement.
• After installation, test the trailer brakes in a safe area before normal towing.

Symptoms of a Worn or Failing Brake Caliper

• Trailer pulling to one side during braking
• Dragging brake, excess heat, or burning smell near the wheel
• Uneven brake pad wear
• Brake fluid leak at or near the caliper
• Reduced braking performance
• Grinding, scraping, or rotor damage caused by pad/caliper problems
• Caliper piston sticking, seized, or not applying pressure correctly

Fitment Guidance

This is not a universal trailer brake caliper. Correct fitment depends on the trailer model, year, VIN, rotor size, hub style, caliper bracket, brake pad style, brake line connection, axle setup, and existing brake system.

• Confirm part number 250-034105 when possible.
• Compare the existing caliper, bracket, and brake pads before ordering.
• Confirm the trailer uses a compatible 10" rotor and 5-lug hub setup.
• Check the brake line connection and mounting bracket style.
• Send photos if you are unsure about fitment.

Associated / Compatible Parts

These components are commonly serviced or inspected when replacing a trailer brake caliper and will be linked as available.

Real-World Insight

A brake caliper should be inspected any time the trailer has uneven braking, dragging brakes, pad wear on one side, fluid leaks, or a rotor that overheats. Replacing the caliper assembly can solve many braking issues, but the rotor, pads, brake lines, actuator, and brake fluid should also be checked so the new caliper is not damaged by another failing component.

Questions or Need Help Matching Parts?

We’re based in Hardeeville, South Carolina, and help customers across the country match EZ Loader trailer parts correctly.

Call us before ordering if you are unsure. Photos, measurements, trailer information, and VIN details can help us verify fitment faster.

Need help identifying your trailer style or where a part is located? Our legacy trailer reference site at 411Marine.com may help you find similar EZ Loader trailer examples. For newer 2026 and later EZ Loader model references, visit EZLoaderTrailers411.com.

What to Have Ready When You Call

• Trailer year, make, and model
• VIN, if available
• Part number from the original component
• Rotor size and hub lug count
• Photos of the caliper, bracket, pads, rotor, brake line, and axle brake assembly